How to replace New Supplier’s TP Screen on Autel MaxiSys Tablet?

Important Notes on the replacement of New Supplier’s TP Screen on MaxiSys Tablets.

 

1.Part Number of new TP screen Involved

501003930     MS906

501003932     MS906BT

501004169     MS908P

501003923     MS908S

Note: The above new TP screen is provided by a new supplier, which will be used for TP replacement of the above models.

 

Need to do first:

1.Update operating system to the latest version first

E.g. Maxisys 906 V03.46.00, Maxisys906BT V03.31.00 , MY908  V03.41.00

If the MaxiSys was out of update period, please use reflashing program (sent via Wetransfer) to update it to the free version.

 

2.Remove Resistance

1). Remove R289 Resistance for MY908

replace-new-suppliers-tp-screen-on-maxisys-tablets-01

 

2). Remove R375 Resistance for MY906/MY906BT

replace-new-suppliers-tp-screen-on-maxisys-tablets-02

 

3.Remove specific buttons for MY906,MY906BT,MY906TS

1). Remove J11, J12 buttons(as showed below) for MY06BT, MY906TS

replace-new-suppliers-tp-screen-on-maxisys-tablets-03

2). Remove J11, J12 buttons (as showed below) for MY906

replace-new-suppliers-tp-screen-on-maxisys-tablets-04

 

 4.Pasting way of TP for MY906,MY906BT,MY906TS

TP plate should be pasted parallel with the magnesium alloy stent.

replace-new-suppliers-tp-screen-on-maxisys-tablets-05

 

Autel MaxiSys Tablet tech support is available on www.auteleshop.com

  • Jeep Cherokee diagnostic tools: Autel MaxiSys Elite

    Looking for Jeep Cherokee diagnosis and service reset tool? I already pick up top 2 for you, that are Autel MaxiSys […]

  • Reset KIA steering angle sensor with Autel DS708 scanner

    Reset KIA steering angle sensor with Autel DS708 scanner   Original Autel MaxiDAS DS708 WIFI wireless OBD2 auto diagnostic scanner […]

  • How to solve Autel DS708 language problems

    How to solve Autel DS708 language problems   Problem: One of Autel DS708 users came across “The language is not authorized” error during the upgrade procedure.   Solution: The reason is that each Autel DS708 multi-language diagnostic system can only support one language in one device. If you select a different language, you will get the error message. Do not add more than one language when update the device.

  • Product Details of MaxiScope MP408

    The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your MaxiSys MS905/MS908 Tablet (with […]