Autel Diagnosis / Key Prograrmming
I put the Autel IM508S & XP400 PRO on a 2015 Mercedes-Benz GLK 350 (W204) for an all-keys-lost job. The key was programmed successfully, and the vehicle started normally with the new key. The interesting part of this job was the Mercedes workflow. Fast All Keys Lost did not support this VIN, so the job … Read more Autel IM508S Review: 2015 Mercedes GLK 350 W204 All Keys Lost Success
Adding a remote on this 2019-2012 Chevrolet Spark is done through the GM Remote Learning menu with Autel MaxiIM KM100. The main thing is getting the vehicle selection right and following the remote button sequence. Vehicle Selection Make sure Autel KM100 is connected to the network, then press OK. Go to IMMO >> GM >> … Read more How to Add a 2019-2012 Chevrolet Spark Key with Autel KM100?
Problem: The Autel IM608 II displays: “Les données sont en cours de préparation, veuillez cliquer sur le bouton Recharger pour les récupérer plus tard.” (The data is being prepared; please click the Reload button to retrieve it later.) Engineer’s Answer: Check the network connection first and retry with Reload. If the issue persists, reinstall the … Read more Fix Autel IM608 II “Data Is Being Prepared, Please Click Reload” Error
The Autel MaxiIM IM508S and IM608 II receive new Mercedes-Benz FBS4 functions with V5.40, dated 21/07/2026. The update adds MRG1 ECM cloning, VGS TCM cloning for six supported transmission control modules, and an FBS4 ISM replacement function. These new functions are available under IMMO. What’s New MRG1 ECM Cloning V5.40 adds a cloning function for … Read more Autel IMMO V5.40: Mercedes FBS4 ECM & TCM Cloning, ISM Replacement
Got a 2023 Dodge Promaster with all keys lost? This job can be done with the Otofix IM1, but you’ll need to read the immobilizer password before the new smart key can be learned. The IM1 follows the same IMMO workflow as the Autel IM508S and IM608 Pro2, so the menu layout is essentially the … Read more How to Program 2023 Dodge Promaster All Keys Lost with Otofix IM1?
When adding a smart key on a 2024 Nissan Rogue, the key point is BCM access. Using the Nissan 40-PIN Adapter with the Autel MaxiIM IM508S, the key learning procedure can be completed through the OBD. Tools & Hardware Autel IM508S/ IM608 II Nissan 40-Pin Gateway 2024 Nissan Rogue Smart Key Non-marring trim removal tools … Read more How to Add a 2024 Nissan Rogue Smart Key with Autel IM508S?
This 2024 MG5/ZS all keys lost job was completed with the Autel MaxiIM KM100. Read the IMMO password first, then use the Add Keys function to learn the new smart key. Read the IMMO Password From the KM100 menu, go to: IMMO → MG → Manual Selection → MG5 → 2021–2022 → Smart Key → … Read more How to Program 2024 MG5 ZS All Keys Lost with Autel KM100?
Issue & Fix: During a Mercedes-Benz EIS key cloning job with Autel MaxiIM IM508S, the device displayed the error message: “Failed to acquire data. Please try again!” at Step 4 and did not show the password write step. In this case, the issue was caused by using a replacement key instead of the original key. … Read more Fix Autel IM508S “Failed to Acquire Data” for Mercedes EIS Password
Today I’m working on a BMW U Chassis BCP3 smart key clone using the Autel IM608 Pro2, GODIAG BDC3 Adapter, and XP400 Pro programmer. The process is straightforward: read the original BCP key data first, then generate the new key through the IM608. Prepare the Tools Autel IM608 II / Autel IM508S GODIAG BDC3 Adapter … Read more How to Clone BMW U Chassis BCP Key with Autel IM608 Pro2?
The Autel IM608 Pro2 + G-BOX3 can clone a compatible DSG Mechatronic by transferring the original TCM data to a used replacement unit. In this case, a donor Mechatronic from a 2013 Volkswagen CC was successfully cloned for a 2012 Volkswagen CC after confirming module compatibility. Case Background The customer supplied a used DSG Mechatronic … Read more How to Clone a 2012 VW CC DSG Mechatronic with Autel IM608 Pro?