Autel Diagnosis / Key Prograrmming
This Nissan Note E12 has just replaced the ECU, so there’s a fault code on the car: “P1611 – ID IDSCORD, IMMU-ECM”. Today I’m gonna use Autel MaxiCOM MK808S to reset its immobilizer to fix the error. Click “NATS”. Turn ignition switch on, then press Yes. After replacing operation >> Replace ECM(used part) … Read more Autel MK808S Reset Nissan Note E12 IMMO after ECU Replacement
Due to certain security risks in ES File Explorer application, Autel plans to replace ES File Explorer by other applications in the System update at the end of December 2024. Please be informed of the following changes. On 64-bit tablets, such as Maxisys Ultra/Elite II Pro, ES File Explorer will be replaced by Files … Read more Autel ES File Explorer Replacment Upgrade Notice
This is a quick guide on how to reset Audi inspection service with Autel IM508S. The procedure also applies to most Autel scan tool like MK808Z, MK900BT, etc. Service >> Oil reset >> Auto detect >> Ins service reset In this test, the flexible service interval display can be reset. After this … Read more Autel IM508S Reset 2016 Audi A6 2.0T Inspection Service
How to enable Mercedes-Benz engine start after crash event/accident with Autel MK808S diagnostic scanner? Once you have changed the pyro fuse, the next step will be to clear the crash data. This is guide you to reset the system step by step. Diagnosis >> Control unit >> Unit of drive >> ECM(Engine Control Unit) >> … Read more Autel MK808Z Enable Mercedes Engine Start After Crash Event
Just did the transmission fluid change in this Volvo, we now need to tell the TCM that it has new fluid. So we’re going to go ahead and do that real quick. You’ll need a bidirectional scanner like Autel MaxiCOM MK808S, not just an OBD2 reader. Cause it’ll work on many different kinds of active … Read more Autel MK808S Reset Volvo Transmission Fluid Change Counter
Are you looking for an easy to use scan tool? This is it – Autel MaxiCOM MK808S diagnostic scanner. It’s amazing. I had a problem with my Ford Edge, so I decided to get this scanner and figure out exactly what was going on. Because we had replaced parts and it didn’t work. Unboxing Review … Read more Autel MK808S Review: Easily Fix Your Car & Do Resets
Today I’ll show how to use Autel MaxiCOM MK808S to do steering angle sensor(SAS) calibration for this car. We can see the SAS traction light is on when I start the car. And this car also got a “Steering Angle Sensor(SAS) fault”, that’s the problem I’m gonna solve. Special function >> Function check sequence … Read more How to do Steering Angle Sensor Calibration with Autel MK808S?
Problem: My Autel MK808 kept saying this when programming on vehicle: “Maxis data have been destroyed. In order to fix exception, device will reboot after 5s later…” What’s the matter? Please advice. Solution Delete “Vehicle” folder under: ES File -> Scan -> Vehicle; Re-download Vehicle app. If the above methods do not work, restore … Read more Fixed: Autel MK808 “Maxis Data Have Been Destroyed” Issue
Problem: I’ve purchased One Year Update Service for this Autel MK808S tablet, but it keeps to popup this message when upgrading any vehicle software: “Your software subscription expired on 2025-03-07. Tap on Renew button to purchase subscription now.” How do I make this message disappear? Please advice. Solution The reason why expired message still appeared … Read more Fixed: Autel MK808S Expired Subscription to Renew Issue
There are 2 annoying flashing warning lights on the 2008 Volvo C30 dashboard. So I’m gonna use the Autel MK808S Scanner to reset it. Diagnostics >> Volvo >> Manual selection >> 2006-2015 >> Europe >> C30 >> 2008 >> D5244T8 >> Yes >> Diagnosis >> Control unit >> ABS/BCM(Anti-lock brake system module) >> Trouble … Read more Autel MK808S Reset 2008 Volvo C30 ABS Warning Light