- Autel MaxiSYS MS908 any good?
This is a review of AUTEL MaxiSys MS908 diagnostic system. About Autel MaxiSYS MS908: The Autel MaxiSYS MS908 has been built to offer extreme ease of […]VAG Group Cars Pre-2011 Autel Service Reset
Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared. More information: www.autel.uk Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]MaxiSys Serial Number & Registration Password
When you first get a MaxiSys it is important to find out your Serial Number and Registration Password. The Video below shows a step by step guide on how to find this on your tool. Related posts: AUTEL MaxiSYS Pro MS908P FAQ Autel have a new member—MaxiSys Registering your MaxiSys Autel […]OBD2 Product Introduction
OBD2 Product Introduction OBD2 products are some of the automobile testing tool, it has detected, reading code, scanning, clear the […]