autel-im608-j2534-write-a-vin-on-a-used-pcm-module-11

  • The Newest Autel MaxiSys MS906TS

    As we konw Autel DS708 was a better auto diagnostic scanner,and now we will introduce the new one -autel ms906ts […]

  • Autel XP400 Key and Chip Programmer Review

    Autel XP400 is powerful Chip and Key Programmer, which need to work with Autel MaxiIM IM608/IM508. Autel Xp400 support Read/Write […]

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]

  • Product Details of MaxiScope MP408

    The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your MaxiSys MS905/MS908 Tablet (with […]