How to use Autel MaxiSys Pro MS908P to program Acura TSX 09 key

Keeps Autel MaxiSys Pro MS908P for some days, usually I use it for diagnosis like reading or clearing some faults. Today, I try it to program a new key for Acura TSX 2009. Work like a charm! I have to say that. MS908P with MaxiFlash Pro J2534 box to program keys like a professional key programmer, e.g. SKP900.

 

Here, I would share my experience of key programming for Acura TSX 2009.

 

items needed:

The original Acura key

 

A spare key to be programmed

 

MaxiSys pro MS908P

Autel MaxiFlash Pro J2534 ECU programming tool

 

My procedure to program a new Acura key

The car starts

Connect Autel MS908P and Autel MaxiFlash Pro J2534 ECU Programming Device with the car

 

MaxiSys pro MS908P starts

 

 

Insert the spare key and original key separately to be ON

 

 

When insert the original key, select Acura on MS908P

 

 

Then USA

 

Then Start New Session

 

Select Diagnosis

 

Then Control Unit

 

Then IMMOBI (immobilizer)

 

Keep the ignition ON until the tester directs you to turn it OFF

 

Program keys with a T5 stamped on the blade of the key…

 

Diagnostic system initializing…

Select IMMOBILIZER SETUP

 

Establishing vehicle communications…

Select ADD AND DELETE KEYS

 

Establishing vehicle communications…

Then ADD KEY

 

Establishing vehicle communications…

Turn the ignition switch OFF

 

Turn the ignition switch ON with an original key

 

Turn the ignition switch OFF within 17 seconds

 

Turn the ignition switch ON with an new key within 20 seconds

 

Turn the ignition switch OFF within 17 seconds

Turn the ignition switch ON within 20 seconds without changing the key

 

Turn the ignition switch OFF

Turn the ignition switch ON

Is the immobilizer indicator light turned OFF?

 

Then check the immobilizer indicator light

 

 

Turn the ignition switch ON

The registration of keys has been completed.

Turn the ignition switch OFF

 

 

Then insert the key newly programmed to have a try and make sure that it works

 

Successfully programmed a Acura key with Autel MS908P and J2534 ECU programmer

This is from OBD Tools 365 Days Shop in Car Key Programmers technical support  Autel MaxiSys Pro MS908P program new key for Acura TSX 2009.

  • Autel MaxiDas DS808 turn off Mercedes SRS light on

    Have SRS warning light on, my car is 2004 Mercedes Benz C240 Gasoline, VIN WDBRH81J74F499208, I am using Autel Maxidas […]

  • Foxwell CRD700 Foxwell CRD700 Scanners Introduction

    Foxwell CRD700 Scanners Introduction Foxwell CRD700 is specially designed for fast and accurate OBD2 diagnosis of fault in common rail […]

  • Autel UAV AutelTech UAV debut in 2015 International Consumer Electronics Show

    AutelTech UAV debut in 2015 International Consumer Electronics Show Autel subsidiary ——Autel Intelligent Aviation Technology Co., Ltd. is shown the three […]

  • Auto diagnosis protocol development and testing

    Auto diagnosis protocol development and testing In the OBD2 auto diagnosis filed, diagnostic equipment for data exchange between ECU and cars, almost all major car companies to develop the relevant standards and protocols.Among them, an onboard diagnostic protocol standard widely used in the automotive sector in Europe is KWP2000 (Keyword Protocol 2000), the agreement implements a complete set of on-board diagnostic services, and to meet the E-OBD (European On Board Diagnose) standards. KWP2000 initially based on K-line diagnostic protocol, due to the limitations of K-line physical layer and the data link layer in the network management and communication speed, then K-lines  can not meet the needs of increasingly sophisticated onboard diagnostic network. Related posts: Explore Auto OBD function (4)——Mirage and reality of […]