ECU Program:How to reprogram ecu by maxidas ds708

ECU Program:How to reprogram ecu by maxidas ds708

Some autel ds708 often ask me a quetion: how to reprogram ecu by maxidas ds708? or  could be ecu programmed in autel ds708 ?

The answer is :NO!!  Because the ds708 could be only read the ecu information and diagnostic the car fault

But !!! if you want to reprogram ecu,you should be use the professional ECU Program device and software.

 

There are some professional Ecu Program equipment as below:

 

KTAG V2.13 ECU Programming Tool

1. Software Version: V2.13 (Avaiable for All V1.89, V2.06 and V2.13) Hardware Version: 5.001
2. Available Protocols for K-TAG: BDM MOTOROLA MPC5xx
3. Support BDM Function Well
4. Multi-Language: 
 English, Italian, German, French, Portuguese, Spanish
5. No Checksum Error
6. Support both Car, Motorcyle and Truck ECU Programming

Proposed price:$79.00

ktag ecu program

2  KESS V2 V2.15 OBD2 ECU Tuning

1. It’s Master Version
2. Software Version: V2.15, Hardware Version: V3.099

(V2.06 is the most stable version, we suggest you use V2.06 full software still, or if you want to use the newest V2.15 then do not use old version software together,otherwise will cause errors)
3. Update by CD
4. No Token Limitation: can be used unlimitedly,no need to worry about tokens any more.
5. With Coverage of All Major Brands and Protocols including Line, CAN, EDC17 and MED17 and Ford J1850
6. Supported Languages: English, German, Spanish, Italian, Portuguese, French
7. No Checksum Error
with New LPC2478 Chip

Proposed price: $85.00

kess v2 ecu program

kess v2 software

3  FGTech Galletto4 V54 Master BDM-Tricore-OBD Function ECU Programmer

1. Latest Version: 2014 V54

2. Supported Operating System:  windows XP. more friendly than Fgtech v53 , much easier to operate
3. Unlock Version: Can Use Directly. No Need To Activate
4. FGTECH V54 PCB board 
5. Supported Languages: English, Italian, German, French, Spanish, Portuguese, Czech, Turkish
6. Support Tricore Function

Proposed price: $42.99

FGTECH ecu programer

Carprog V7.28

Functions:
1. Make the Universal tool – CARPROG inside have powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins forEEPROM in-circuit programmer, future possibility’s to make on the same hardware Microcontroller programmer, K-line diagnostic,CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.
2. Make the Low Cost tool – with CARPROG basic you will receive many extra functions (like car radio code calculator CC1, EEPROM
programmer and VAG dashboard’s programmer by CAN) and all additional software’s you can buy extra according your need.
3. Make it User Friendly – Windows XP software, works without any installations, on all PC, use USB to PC link, all adapters schematics diagrams on-line.

The best function of it is airbag reset,and it can not do by antenna.

CARPROG FULL V7.28 Softwares:

ECU-OPEL – OPEL login reader from motor hybrid ECU. Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.
OPEL CAN – Opel ECU by CAN programmer – read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU
PSG16 – Opel PSG16 diesel pump by OBDII – read/change mileage, read PIN, reset ECU
OPEC28 – Opel Siemens Simtec ECU Tool Advanced

Proposed price: $51.99

carprog ecu

 

 

 

 

5 V2.13 FW V7.003 KTM100 KTAG ECU Programming Tool

1. Software V2.13, Hardware Version V7.003
2. Multi-Language Support: English, Italian, Portuguese (If you need other languages, please feel free to contact us)
3. Support BDM Function Well, Available Protocols BDM MOTOROLA MPC5xx
4. Support both Car, Motorcyle and Truck ECU Programming
5. V2.13 KTAG Has Unlimited Tokens, We Add a Renew Button, when you run out of tokens, only need press the renew button, then you will have tokens again.

Proposed price: $379.00

ktm100 ktag ecu programming