Autel Maxisys Mini MS905 Updating and Using Error solution

As a senior user, I write this blog to share some available solutions to solve the errors when update and use Autel Maxisys Mini MS905

autel maxisys mini ms905

About update

Problem description:

The network connection is fine, but when going to update page, it says “Network not available, please check the network”.

Solutions:

1 Enter Root Explorer/mnt/sdcard/scan/menu and check if there is “init.xml” file. If there is the file, just delete it. Then enter the menu again to make sure if it is deleted successfully.

2.If the network is still not available, please select the Maxisys icon on the main screen. Then hold it and move it to the top where you can see App info, force stop the process of Maxisys and clear the data. Then try to update again.

About Using

Problem description:

When I use the mini MS905, the error message “Unfortunately, maxisys has stopped” on the table.

Solutions:

Just try the following steps:

1 Connect Maxisys mini to PC via USB cable.

2 Turn on USB storage on the msxisys.

3 Wait for several seconds and turn off USB storage.

4 Restart the scanner and try again.

  • vxdiag vcx nano VXDIAG VCX NANO and Forscan Test on Sport Trac Mountaineer

    VXDIAG VCX NANO and Forscan Test on Sport Trac Mountaineer I want just Shared my repairing experience of 2002 Sport Trac with 1998 Mountaineer drivetrain, with VXDIAG VCX NANO Ford and ELS27 FORScan scanner. Haven’t been able to get any past v86 to work when installed on a laptop running XP. I tried installing v81 then v91 then v97 but that didn’t work, not even for 3 days. Nor did changing the time, date and time zone. I was able to set the tire size and some other things, including reading DTCs that require communication with the PCM. But when attempting to program the latest calibration to the PCM or do the ABS Service Bleed, there’s suddenly a “PCM Communication Failure”. It also fails to do the KOEO and KOER tests, claiming it cannot sense when the brake pedal is depressed. All bogus, false errors. I get the same “communications failure” on a completely stock 1998 Mountaineer as I do on my 2002 Sport Trac with 1998 Mountaineer drivetrain. FORscan scan tool can do the KOEO and KOER tests and the ABS module self test with this VCX NANO device, but it does not yet support the ABS bleed function. FORscan can also clear KAM from the PCM, which IDS v86 fails to do with the VXDIAG VCX NANO, again that “communications failure” with the PCM. FORscan can also do the other tests that involve running the windows, wipers, locks and windshield washer. […]

  • Launch X431 V vs. Autel DS708

     Launch X431 V scan tool better than Autel MaxiDAS DS708? Here is a comparison chart of “Launch X431 V vs. […]

  • autel ms906 How To Register Autel Maxisys MS906 Diagnostic Scanner

    How To Register Autel Maxisys MS906 Diagnostic Scanner Original AUTEL MaxiSYS MS906 Auto Diagnostic Scanner is the updated Version of […]

  • Autel md704 code reader Autel MaxiDiag Elite MD704 EU704 with 4 System and Full System

    Autel Maxidiag Elite MD704 EU704 With Data Stream Function Europen Vehciles Full System   Autel Maxidiag Elite MD704 With DS Model […]