What is Autel G-Box Tool and How to Use

Autel G-BOX accessory tool is a good choice for Benz owners. It’s used with Autel IM608 or IM508 with XP400 (or Auro IM600), can calculate password fast on Mercedes- Benz vehicles in AKL, and helps to reduce the time for reading ECU data from W204 and W207 EISs by over 85%. Here share the guide to use Autel G-BOX.

 

How to use Autel G-BOX for Mercedes AKL?

Method 1: OBDII operation when all keys of Mercedes-Benz vehicle are lost
This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the year 2009

Connection Steps:
1.Connect the G-Box to vehicles’ OBDII
2.Remove the fuse of vehicle EIS, Connect the Relay ports to the fuse using the supplied fuse cable
3.When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable
4.Connect the G-Box to the Autel Diagnostic Tablet

Method 2: Desktop operation when all keys of Mercedes-Benz vehicle are lost
This method is suitable for all Mercedes-Benz EISs that are already supported by Autel Diagnostic Tablet

Connection Steps:


1.Connect the G-Box to the Mercedes-Benz EIS using the supplied DB15 Cable
2.Connect to the DC port of G-Box using a power adapter (DV 12V)
3.Connect the G-Box to the Autel Diagnostic Tablet
Learn more:

When you need Autel G-box?

It’s required when you do all keys lost for Mercedes or BMW.

1.Mercedes-Benz all keys lost, faster password calculation
– 8x times faster password calculation for EIS W172, W204, W207;
– 4x times faster password calculation for EIS W209, W211, etc.

2.Mercedes-Benz all keys lost, no more repeated insertions and removals of ir simulator
W164/-2008,W251/-2008,W164/2009-,W169,W251/2009,W216,W221(partial),W202(K)/W208(K)/W210(K), W203(K)/W463(K)

3.Mercedes-Benz all keys lost, can be programmed on the vehicle without removing the EIS
Except for EIS w164/-2008, W251/-2008, W221, W202(K)/W208(K)/W210(K), AND W203(K)/W463(K), all other EIS can be programmed on the vehicle directly.

4.Mercedes-Benz all keys lost, BMW DME/DDE ISN reading and writing in boot mode

23 categories of Bosch engine, including MEVD/EDC17.

6 categories of SIMENS/continental engine, including MSD/MSV engine

Source: http://www.eobdtool.co.uk/wholesale/autel-g-box-benz-bmw-adapter.html

  • Review on Foxwell NT500 VAG scan tool

    Review on Foxwell NT500 VAG scan tool Foxwell VAG NT500 Owner:cpaugh I just received mine today. Seems very comprehensive I […]

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]

  • MaxiSys-Pairing your Bluetooth VCI

    Recently,more and more people want to connect the bluetooth to Maxisys device Bluetooth pairing is the best way to communicate the VCI with your MaxiSys; it allows your to diagnose the vehicle without having to be sitting inside. Difficulty: Easy Time: 2 minutes Related posts: Installing the MaxiSys […]

  • What‘s Auto Model Support for Autel Maxisys

    What‘s Auto Model Support for Autel Maxisys Autel Maxisys Many people are always to buy car diagnostic  tool,but they often […]