Autel Diagnosis / Key Prograrmming
New upgrade! Advanced key programming accessories Autel APB130 Adapter is arriving in stock now. Supports to read VW MQB48 series NEC35XX dashboard for adding key. *Note: It needs to have Autel XP400 Pro + APB130 Adapter together for this function. Supported Chip Type List D70F3532 D70F3525 D70F3526 D70F3537 D70F3529 Supported Car List Volkswagen … Read more Autel APB130 Adapter for VW MQB48 NEC35XX Add Key
This is a Autel XP400 PRO Programmer testing guide to troubleshoot “The programmer is disconnected” issue. There are 2 situations: normal and abnormal. You may need to use Autel IM508/ IM608 II Tablet or PC software to help check whether the connection is normal. Normal Situation Steps: Connect XP400 PRO programmerwhile in the main menu screen. … Read more Fixed: Autel XP400 PRO “The programmer is disconnected” Issue
Problem: I have noticed when Autel MaxiIM IM508 is connected to XP400 Pro programmer, the screen touch failed to return to be normality. I have to disconnect and restart IM508. The USB is original. There is no way to do EWS3. I have done everything but it tells me the same thing: programmer not connected. Please help! Troubleshooting Please do below actions with XP400 PRO: 1. Enter the BMW EWS3 path of the programmer to try to read and write; 2. Check whether the adapter board pins correspond to the EWS3 slots accurately; 3. Operate in strict accordance with the operating instructions. Step 1. Connect the matching board and EWS3 module first. Step 2. Connect the board and XP400 PRO. Step 3. USB connect XP400 PRO and tablet. Step 4. Connect the … Read more Troubleshooting: Autel IM508 + XP400 Pro Programmer Not Connected
This post discusses errors that might occur when using the Autul XP400 Pro and the steps to take to resolve these issues. (Same solution with XP400) Vehicle Linking Error A communication error occurs if the diagnostic tablet fails to communicate with the XP400 Pro. Please do the following to correctthe error: 1. Verify that the … Read more How to solve Autel XP400 Pro communicate error
Autel XP400 Pro is an Advanced All-in-One Key Programmer, could be used with Autel IM508 and Autel IM608, IM608PRO, Also IM100 and IM600 as well. XP400Pro programmer upgrade and improvement compare to XP400 Fixed the problem of connecting the XP400 to the vehicle ODB connector causing the burnout of the device. Fixed the stabilityproblem of using … Read more What’s new of Autel XP400 Pro