How to register Autel MaxiDAS DS808 scanner

This a how-to guide of 2017 Autel MaxiDAS DS808 registration.

– Necessary to perform Autel DS808 registration???

– Definitely yes! To get access to the Support platform and obtain update and other services from Autel, you are required to register the Autel scanner DS808 for the first time you use it.

– What you need for the maxidas ds808 registration?

1- autel scanner ds808

2- account id

3- serial number & password

– How to register autel maxidas ds808?

  1. Go to the website: http://pro.autel.com.
  1. On the Sign In page, input your account ID and other information to

log in, if you already have an account.

  1. If you are a new member to Autel and do not have an account yet,

click the Create Autel ID button on the left side.

  1. Enter the required information in the input fields, read through

Autel’s Terms and Conditions and tick on Agree, and then click

Create Autel ID at the bottom to continue.

  1. The online system will automatically send a confirmation email to

the registered email address. Validate your account by clicking the

link provided through the mail. A product registration screen opens.

  1. Find out the scanner’s serial number and password from the About

section of the Settings application on the Display Tablet.

  1. Select the product model of your DS808 scanner, enter the product serial

number and password on the Product Registration screen, and click on

Submit to complete the registration.

Then you can use Autel DS808 for OBDII diagnosis and special functions (Oil Reset Service, TPMS Programming Service, EPB Service, ABS/SRS Services, SAS Calibration Service, DPF Regeneration Service)

autel-scanner-ds808-3 autel-scanner-ds808-2 autel-scanner-ds808-4 autel-scanner-ds808-5 autel-scanner-ds808-6 autel-scanner-ds808-7 autel-scanner-ds808-8 autel-scanner-ds808-9 autel-scanner-ds808-10 autel-scanner-ds808-11

  • How to solve Autel DS708 language problems

    How to solve Autel DS708 language problems   Problem: One of Autel DS708 users came across “The language is not authorized” error during the upgrade procedure.   Solution: The reason is that each Autel DS708 multi-language diagnostic system can only support one language in one device. If you select a different language, you will get the error message. Do not add more than one language when update the device.

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]

  • Diagnose LHM on 2006 2500 Sprinter, Xentry scanner or Autel MD802?

        Let’s start with issues: I’ve been trying to find the reasons for Limp Mode on my 2006, 2500 […]

  • autel maxisys wireless Printing From Your MaxiSys

    Wireless printing can be difficult to get your head around as it requires your MaxiSys to communicate with your PC […]