Autel

How to Use Autel MaxiScope MP608: Setup, Connection & Update Guide

by

The Autel MaxiScope MP608 is a portable 4-channel automotive oscilloscope designed to work with compatible Autel MaxiSys tablets for waveform testing and electrical signal diagnosis. It connects through USB and supports functions such as 12-bit vertical resolution, one-click setup, CAN FD, and FlexRay testing. This guide explains how to connect the Autel MP608, open the … Read more How to Use Autel MaxiScope MP608: Setup, Connection & Update Guide

How to Add a 2024 Nissan Rogue Smart Key with Autel IM508S?

by

When adding a smart key on a 2024 Nissan Rogue, the key point is BCM access. Using the Nissan 40-PIN Adapter with the Autel MaxiIM IM508S, the key learning procedure can be completed through the OBD. Tools & Hardware Autel IM508S/ IM608 II Nissan 40-Pin Gateway 2024 Nissan Rogue Smart Key Non-marring trim removal tools … Read more How to Add a 2024 Nissan Rogue Smart Key with Autel IM508S?

How to Register a BMW X5/X6 Battery with Autel MK808Z-BT?

by

Battery replacement is only half the job. Once the new battery is installed, register it with the Autel MaxiCOM MK808Z-BT before returning the vehicle to service. The following procedure was carried out on a BMW X5/X6. Register the Battery Replacement Turn the ignition ON with the engine OFF. On the Autel MK808Z-BT, navigate to: IMMO … Read more How to Register a BMW X5/X6 Battery with Autel MK808Z-BT?

Autel TPMS Solutions: Simplify Sensor Programming & Workshop Service

by

Autel provides a complete TPMS ecosystem with programmable sensors and professional service tools, including ITS600, TS508 WF, TS900, MK906S Pro2-TS, ITS600 CV, and TBE200. Designed for modern workshops, Autel TPMS Service Tools solutions help technicians expand vehicle coverage, simplify sensor inventory, and complete TPMS service faster and more efficiently. One Complete Ecosystem for TPMS Service … Read more Autel TPMS Solutions: Simplify Sensor Programming & Workshop Service

Fix Autel Elite II Pro 0V Voltage & ECU Communication Failure

by

An Autel Elite II Pro displayed 0V vehicle voltage, stopped automatic VIN detection, and could not communicate with any ECU. A factory reset of the Elite II Pro tablet resolved the issue. Resolution Perform a factory reset on the Elite II Pro tablet. The device returns to normal operation. If the issue persists after the … Read more Fix Autel Elite II Pro 0V Voltage & ECU Communication Failure

How to Program 2024 MG5 ZS All Keys Lost with Autel KM100?

by

This 2024 MG5/ZS all keys lost job was completed with the Autel MaxiIM KM100. Read the IMMO password first, then use the Add Keys function to learn the new smart key. Read the IMMO Password From the KM100 menu, go to: IMMO → MG → Manual Selection → MG5 → 2021–2022 → Smart Key → … Read more How to Program 2024 MG5 ZS All Keys Lost with Autel KM100?

Fix Autel IM508S “Failed to Acquire Data” for Mercedes EIS Password

by

Issue & Fix: During a Mercedes-Benz EIS key cloning job with Autel MaxiIM IM508S, the device displayed the error message: “Failed to acquire data. Please try again!” at Step 4 and did not show the password write step. In this case, the issue was caused by using a replacement key instead of the original key. … Read more Fix Autel IM508S “Failed to Acquire Data” for Mercedes EIS Password

How to Clone BMW U Chassis BCP Key with Autel IM608 Pro2?

by

Today I’m working on a BMW U Chassis BCP3 smart key clone using the Autel IM608 Pro2, GODIAG BDC3 Adapter, and XP400 Pro programmer. The process is straightforward: read the original BCP key data first, then generate the new key through the IM608. Prepare the Tools Autel IM608 II / Autel IM508S GODIAG BDC3 Adapter … Read more How to Clone BMW U Chassis BCP Key with Autel IM608 Pro2?

How to Clone a 2012 VW CC DSG Mechatronic with Autel IM608 Pro?

by

The Autel IM608 Pro2 + G-BOX3 can clone a compatible DSG Mechatronic by transferring the original TCM data to a used replacement unit. In this case, a donor Mechatronic from a 2013 Volkswagen CC was successfully cloned for a 2012 Volkswagen CC after confirming module compatibility. Case Background The customer supplied a used DSG Mechatronic … Read more How to Clone a 2012 VW CC DSG Mechatronic with Autel IM608 Pro?

How Autel Cloud Works with MaxiSYS Diagnostic Reports

by

Autel Cloud is a cloud-based diagnostic report management platform for compatible Autel Automotive Diagnostic System Tools. It helps technicians upload, store, and access vehicle diagnostic reports, scan data, and inspection records from different devices. By combining Autel Cloud with MaxiSYS diagnostic functions, workshops can streamline pre-scan, post-scan documentation, topology reporting, and diagnostic data sharing without … Read more How Autel Cloud Works with MaxiSYS Diagnostic Reports