Autel MaxiIM IM608 Review

Autel MaxiIM IM608 review: Autel IM608 is one of  the most advanced all in one,Combines  IMMO key programming, all systems diagnostics and advanced service.

Autel MaxiIM IM608 Review: Function List

  1. powerful abilities (diagnosis and programming)

– diagnosis

  • All System Diagnostics
  • Auto Search / VIN Finding
  • Reading / Deleting Error Code
  • Viewing the Live Data Stream
  • View Records of Failure History
  • Store and Data Management Applications
  • MaxiFlash JVCI ECU Programmer (Bluetooth / USB Cable)

– advanced functions

  • Special functionsEPB, DPF, SAS, Oil Reset, BMS and TPMS Sensor ID Re-Programming etc
  • ECU Coding

– key programming

SMART MOD: Explanatory and Router Key Programming
EXPERT MOD: Advanced Key Programming

  • PIN / CS Reading (Full Lost)                                                            
  • Key Generation
  • Key Programming
  • Command Introduction
  • Backup / Repair IMMO Data
  • IMMO ECU Brain Reset / Adaptation
  • IMMO ECU Brain Reset / Coding 
  • BENZ 3rd Generation IMMO Key Splicing, Full Lost, Key Programming
  • BMW FEM / BDC Key Programming and ECU Adaptation
  • BMW CAS4 / 3/2 Key Programming
  • VW / AUDI MQB Key Programming, 48 Transponder (96-bit) Key Splicing, Full Lost, A6 Full Lost and More …
  1. wide vehicle coverage

pls search your car models at https://pro.auteltech.com/measurecarApp-1-1.html?m=94&proTypeCode=IM608(IMMO)&operatorType=2

  1. free update for 2 years

will help save a lot for a universal diagnostic tool update usually cost more than 1000 usd a year

  1. better than otosys im600

im600 received a lot of good reviews or feedback. and im608 is produced based on im600. things on im608 will be reliable and pp can use it with relief.

Autel MaxiIM IM608 Review by user:

I go to Autel IM608 Volvo application, then choose Manual selection. I find that IM608 supports XC60 made in 2008-2018. I use a USB cable to connect the vci device to improve connection speed. It’s a important step to turn off Bluetooth first before use the USB. Then I insert the learned key into the key slot and turn the ignition on. After that, I turn the ignition off and remove the key from the key slot. Then it starts to establish vehicle communication. You need to know if a key is to be learned, insert the new key into the key slot and press learning button to continue. Very lucky, the key learns successfully. I take out the key and insert it again to test the functionality.

Autel MaxiIM IM608 Review: Autel im608 vs Otosys im600

Product Autel MaxiIM IM508 Autel MaxiIM IM608 Aurodiag OtoSys IM100 Aurodiag OtoSys IM600
In/ Out of Stock In stock In stock Out of stock!
Stopped production!!
Out of stock!
Stopped production!!
IMMO
Smart Mode (Guided and Automated Key Learning Function)
Expert Mode (Advanced key Learning)
Auto Detect Make/Model/Year/System
Read PIN/CS
Read PIN/CS (All Keys Lost)
Key Generation
Key Learning
IMMO ECU Reset/Adaption
IMMO ECU Refresh/Coding
Remote Learning
Backup /Restore IMMO Data
AUDI Q5/A4/A5 2015-2017 Read PIN/CS N/A
BMW FEM/BDC Key Learning and Adaption
Mercedes Key Learning ×
Benz 3rd Generation IMMO Add key, all key lost, key Learning N/A
BMW FEM/BDC Key Learning and ECU adaptation
BMW CAS4/3/2 key learning CAS4 available when connected to XP400
VW /Audi MQB (VDO & JCI) add key, IMMO V A4/A5/Q5 2015+ Key learning N/A
VW /Audi /Skoda / Seat IMMO III /IV /V add key, all key lost
Programming
Key read /write
EEPROM Read/Write
MCU Read/Write Basic Advanced Basic Advanced
ECU Read/Write When connected to XP400
Key Programming
MC9S12 Encryption Chip read/write When connected to XP400
IC Card Read/Write When connected to XP400 N/A
Mercedes Infrared Key Read/Write When connected to XP400 N/A
Remote Frequency Detect When connected to XP400 N/A
Support PC When connected to XP400
OE-Level Diagnostics
All Systems for Over 80 Makes and Models N/A
AutoVIN /Auto scan
Read /Erase codes
View, record, playback live data
View Freeze Frame data
Shop and data Manager applications
MaxiFlash JVCI ECU Reprogrammer (Bluetooth /USB cable) N/A
OtoFlash (J2534 ECU Reprogrammer) N/A
Advanced Service Functions
Oil Serive Reset
Parking Brake Pad Relearn After Replacement
Steering Angle Sensor Relearn
Battery Registration and Reset
Diesel Particulate Filter Regeneration
Tire Pressure Monitoring System Sensor ID Relearn
ECU Coding N/A N/A
VW/Audi Component Protection N/A
Complete Service Functions N/A N/A
Tool Features
Built-in Rechargeable Li-ion Battery 5000 mAh 15000 mAh 5000 mAh 15000 mAh
Internet Updatable Wi-Fi Wi-Fi Wi-Fi Wi-Fi
Multilingual Support
Limited One Year Warranty
Touchscreen 7-inch 10.1-inch 7-inch 10.1-inch
Memory 32 GB 64 GB 32 GB 64 GB
Processor Cortex-A9 processor Cortex A7+A15 six-core processor Quad-core processor Hexa-core processor
Camera N/A 8.0 Megapixel N/A 8.0 Megapixel
Resolution 1024×600 1920×1200 1024×600 1920×1200
Note: XP400 can be purchased separately. 
 

Conclusion:

Autel IM608 is the winner!

  • autel-maxisys-tcp-subscription-01-1024x576 How to Register Autel MaxiSys ID and Update Autel Software

    This post is available with Autel MaxiSys tools TCP subscription (Total Care Program), registration, software updates and features.   The […]

  • Autel AP200 code scanner is great for BMW F10 5 series Autel AP200 Scanner Customer Review on BMW F10 5 series

    If it doesn’t require a lift or an engine hoist I usually tackle it. I knew Autel had a great […]

  • How to solve Autel DS708 language problems

    How to solve Autel DS708 language problems   Problem: One of Autel DS708 users came across “The language is not authorized” error during the upgrade procedure.   Solution: The reason is that each Autel DS708 multi-language diagnostic system can only support one language in one device. If you select a different language, you will get the error message. Do not add more than one language when update the device.

  • How to solve Autel XP400 Pro communicate error

    This post discusses errors that might occur when using the Autul XP400 Pro and the steps to take to resolve […]