Hello! I’m going to make a spare key for this 2021 Hyundai Kona with Autel KM100 Key Programmer by OBD. This is the Autel IKEY Remote to be programmed and the original key. So let’s see how to generate the remote.
Put the universal key into KM100E key slot.
Universal key >> South America >> Hyundai >> KONA(OS) >> Hyundai KONA(OS) 2019-2021 >> Generate universal key
Key generation is successful.
America >> 2018-2021 >> Yes >> Control unit >> Read immobilizer password >> Read pin code(47 smart card) >> Yes >> OK
Reading password…
The password that is read: 234369
Hot function >> Smart key learning >> Start
This function supports add key and all keys lost.
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.
Press “Yes” to continue.
Turn the ignition off(note: the instrument screen is black).
Open and then close the driver door once!
Autel KM100E will automatically enter the security code, press OK.
Note! Click OK to complete the following steps.
Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash(if the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed).
Programming succeeded.
Press Yes to program next key. Just repeat the operation.
Press No to complete.
Number of current keys: 2
Please exit the system to the vehicle selection menu and check if the key is programmed successfully.
Both keys can work well.
Successfully done.
Contact Info:
Email: sales@AutelShop.de
Wechat: +86-13429866263
Whatsapp: +86-13429866263