Autel AutoLink AL539 OBD2 SCAN TOOL

Autel AutoLink AL539 OBD2/CAN SCAN TOOL

1.The AutoLink AL539 OBDII & Electrical Test Tool supports all 10 modes of  OBDII test for a complete diagnosis.
2.easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
3.Languages: English, German, French, Polish, Spanish
4.Support Update Online
5.Works on Almost 1996 and newer vehicles(OBDII & CAN)-domestic and import

NEXT GENERATION OBDII&CAN SCAN TOOL AutoLink AL539 Internet Update Multilingual Menu

Top 3 Reasons to Get AutoLINK AL539:

1.Languages: English, German, French, Polish, Spanish
2.Support Update Online
3.Works on Almost 1996 and newer vehicles(OBDII & CAN)-domestic and import

AL539 Features:

Features the unique patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification
Easy-to-read AVOmeter allows you to test voltage, continuity and current at the fingertip
Capable of diagnosing 12V charging systems, starting systems and condition of discharged battery
Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
Easily determines the cause of the Check Engine Light (MIL)
Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays monitor and I/M readiness status (emissions)
Reads live PCM datastream, live O2 sensor test data, freeze frame data
Graphs data (1996 and newer)
Troubleshooter codes tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu and DTC definitions-English, Spanish and French, etc.
Retrieves vehicle information (VIN, CIN and CVN)
Internet updateable and upgradeable
Prints data via PC
Autel AutoLink AL539 Specification:
Display                                                               TFT color display (320 x 240 dpi)
Operating Temperature                                             0 to 60°C (32 to 140 F°)
Storage Temperature                                                -20 to 70°C (-4 to 158 F°)
Length\Width\Height                                      175 mm (6.91”)\96.6 mm (3.80”)\37 mm (1.46”)

Weight                                                    0.3kg (0.8lb, without wire) or 0.68kg (1.82lb, with wire)

Autel AutoLink AL539 Package Including:

1pc x Auto Link® AL539
1pc x User’s manual
1pc x CD
1pc x USB cable
1pc x OBDII Cable
1pc x Protective Nylon Case
1pc x Probes
1pc x 3.7V Li-ion battery

Autel AutoLink Comparision:

  • OBD2 can scan tool autolink Autel al619 How to change your Autel AL619 English software to French?

    How to change your Autel AL619 English software to French? Original AutoLink Autel  AL619 OBDII & CAN ABS and SRS scanner supports multi-language, including German, French, Spanish, Portuguese, Polish, Italian, Dutch and Russian. The default language is English. But you are able to change the language you want if you register at Autel official website and provide your device SN. If the Autel AL619 scan tool shows it’s the French version, but it only shows “Control” and “Play” on the screen without giving any error massage. No matter how it was connected by OBD or USB, Autel AutoLink scanner didn’t work at that time. Here are some screenshots when updating Audi software: Autel AutoLink AL619 scanner can be upgraded into the French version so the vehicle software must be the French version. If the language of the scanner is the still English version, the auto diagnostic tool cannot be seen. When you set the Autel AL169 scanner main unit into the French version, you should set the software into the French version after the machine restarts to enter the software equipment. That is, the software for diagnosing vehicle and the machine language should be the same, i.e French, so that the software for being used for the vehicle can be seen on the computer. In short, after you update the French software, you should also setup your Autel AL619 device language to be French. […]

  • How to solve Autel DS708 language problems

    How to solve Autel DS708 language problems   Problem: One of Autel DS708 users came across “The language is not authorized” error during the upgrade procedure.   Solution: The reason is that each Autel DS708 multi-language diagnostic system can only support one language in one device. If you select a different language, you will get the error message. Do not add more than one language when update the device. Related posts: Autel MaxiDas DS708 Language Setup […]

  • ACI Scanner ACI Scanner Auto Communication Interface software free download

    ACI Scanner Auto Communication Interface software free download ACI Scanner Tool is a professional PC diagnostic scan tool for all […]

  • Diagnose LHM on 2006 2500 Sprinter, Xentry scanner or Autel MD802?

        Let’s start with issues: I’ve been trying to find the reasons for Limp Mode on my 2006, 2500 […]