Autel MaxiSys MS908 Pro Support SAAB Cars
Autel Maxisys
VAG Group Cars Pre-2011 Autel Service Reset
Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared. More information: www.autel.uk Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]
Autel MK908 Compare with Autel MS908
The MaxiCOM MK908 is an upgraded version of MaxiSys MS908, what’s the difference between them? Price: Autel MaxiCOM MK908 Scanner: 1,745 euro […]
How to update Autel MaxiDAS DS708
How to update Autel MaxiDAS DS708 Register the Tool: Please log in our website to register an Autel ID. Then log in our website with your Autel ID and password to register your MaxiDAS DS708. http://pro.auteltech.com/ When registering DS708 on our website, please make sure that the serial number and register password that you input are correct. On DS708, you can press on Setup/Help->About to double check the serial number and register password.
Autel MaxiIM IM608 Compare with MS908P
Autel MaxiIM IM608, replacement of Auro OtoSys IM600, features in IMMO functions for over 60 worldwide makes and models as well […]