- Does the Autel maxidas ds708 support dpf regeneration?
Does the Autel maxidas ds708 support dpf regeneration (dpf reset)? A Car Owner ask a questions:Does the Autel maxidas ds708 […]Autel IM508 Test Report: Add New Key to 2008 Audi Q7 ID 8E Successfully
Confirmed! It’s tested ok to program new key to 2008 Audi Q7 ID 8E using Autel MaxiIM IM508. Tools […]How to Use Autel Products to Diagnose Chrysler Jeep Dodge Fiat Alfa 2018+
Today, Autel engineer used one Autel Chrysler 12+8 OBDII connector cable to connect with Autel MaxiSys MS908S Pro, the purpose […]VAG Group Cars Pre-2011 Autel Service Reset
Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared. More information: www.autel.uk Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]