Free Download Autel MK908 PRO II Flash Package & Instruction

by

Here to free download Autel MK908 PRO II/ MK908 II flash package & instruction for solving system crash or stuck issue. The package includes 2 zipped files.

 

Where to free download Autel MK908 PRO II flash package?

QPST_2.7.496(60.2MB):

https://mega.nz/file/6Y0VgDiY#HG0qblcrrM1h7xWLOwiYkYg3imJQtZxiX4SA_aAoKcY

MK908 II flash package_dv2123(3.82GB):

https://mega.nz/file/jB0zRSiQ#FVAZga007vOZMcDnDRYjE8jYRtqWjh7vW3SltQiF1Xc

 

*Be sure to download both zip packs.

 

How to flash Autel MK908 PRO II?

NOTE:

Please firstly try to follow step1, step3, step4 to flash the device.

If still not work, then try to follow step2, step3, step4 to flash the device.

 

Step1. Steps to Enter Burning Mode with TF Card:

  1. Copy the “dv2123”folder to the TF card to the root directory of the TF card.

  1. Insert the TF card into theMK908 PRO2 tablet, then restart the tablet, the tablet will automatically enter the burning mode.
  2. Connect the motherboard to the PC through usb, and the device manager of the PC can see the device.

 

Step2. Enter The Flashing Step

  1. Open the top cover of the device, unplug the battery at the device end, reconnect it, power off the device, and the power indicator light does not light up.
  2. Press and hold the button on the motherboard and connect the miniUSB, only for 906Pro-660 models.

 

 

Step3. Flash Driver And Flash Tool Installation

  1. Unzip the flash driver and toolkit QPST_2.7.496.zip.
  2. Install the driver, click the option in the middle of Driver “Qualcomm USB Driver V1.0.exe” and click Next.

  1. Install the flashing tool, click“2.7.496.1.exe” and click next until the installation is complete

  1. Open the flashing tool and enter qfil in the system search box.

 

  1. Wait for the port to display 9008, select as shown below.

 

  1. Select the program storage location.

 

  1. Load xml.

 

  1. Click download and release the button on the motherboard until Download success.

 

Step4. NV Configuration

  1. 1. Copy the NvConfigs directory in the firmware to the root directory of the TF card or U disk or push it to the /sdcard directory;
  2. 2. Open the serial number burning APP, click to write NV configuration;

 

  1. Check the corresponding NV, click OK, the device will restart automatically;
  2. After the writing is successful, the device will restart automatically (if there is a failure in the writing item, the device will not restart automatically);
  3. After restarting, enter the management program interface, open the management program, click Settings > About, view the product name, and displaythe corresponding product.

 

Contact Info:

Email: sales@AutelShop.de

Wechat: +86-13429866263

Whatsapp: +86-13429866263

 

www.autelshop.de