maxisys-pro-ms908p

maxisys-pro-ms908p

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]

  • autel-maxisys-ms906bt-bi-directional-test-01 Autel MS906BT Bi-directional Capabilities: Confirmed Working

    Autel Maxisys MS906BT bi-directional scan tool provides specific subsystem and component tests. This selection may appear as Actuators, Actuator Test, […]

  • Autolink al539 Autel AutoLink AL539 OBD2 SCAN TOOL

    Autel AutoLink AL539 OBD2/CAN SCAN TOOL 1.The AutoLink AL539 OBDII & Electrical Test Tool supports all 10 modes of  OBDII test […]

  • Autel TMPS Tool Reprograming Lexus RX Sensor

    Car model and year: the wheels came off 2016 Lexus RX, these were meant for the 4th gen. Symptom description: […]