Autel Maxisys MS906TS Update Guide

Here is the guide about how to update Autel MS906TS , Other Autel Maxisys tool is the same method.

autel-maxisys-tablet-update-01

Before doing any updates, you need to confirm you’re registered your device on the official site. If you need assistance with registration, please browse this post on Autel Registration.

If your Autel Maxisys ms906ts is registered, and you want to do the update, please firstly make sure your tool is connected to the WIFI network.

If your tool isn’t already on the main Android home screen, go ahead and press the house button on the bottom left corner. It will take you to this screen, then you will go under system settings to turn on the WIFI. And that whatever network that you need to be connected to it. If it is not connected, please go ahead to select the network and enter in a password that one existed.

autel-maxisys-tablet-update-02 autel-maxisys-tablet-update-03

Now you want to go back into your main screen and go under Maxisys, your tool may see Maxi TPMS, MaxiIM or even MaxiCheck.

autel-maxisys-tablet-update-04

Now Let’s go into the Update section. For me, I only have one update that I’m gonna do today. Go ahead and press that green arrow and let your update begin.

autel-maxisys-tablet-update-05 autel-maxisys-tablet-update-06

Remember, if you have any questions or concerns, you can always contact at our tech support: https://www.uobdii.com/wholesale/brand-autel/

How to Update Autel Maxisys Tablet Tool:

Learn more:

Autel Maxisys Tablet Diagnostic Tool Reveiw and Comparison

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]

  • maxidas ds708 scanner download

    Autel maxidas ds708 scanner download Autel maxidas ds708 manual user guide http://www.autelscanner.org/download/   Autel maxidas ds708 software download http://www.auteltech.com/autelcms/UpdatesDownloads/430.jhtml http://www.auteltech.com/autelcms/UpdatesDownloads/430.jhtml […]

  • Autel MaxiIM IM608 Failed Work, How to do?

    If Your Autel MaxiIM IM608 work failed, and you have no idea to solve the problem. You can send the […]

  • Autel MaxiCom MK906 Compare with MaxiSYS MS906/MS908P

    Autel new released product MaxiCOM MK906 is based on the Android operating system and is featured with an extensive coverage […]