Autel KM100 Program 2022 Hyundai Tucson All Keys Lost

Autel MaxiIM KM100 Key Fob Programming Tool can successfully program 2022 Hyundai Tucson(NX4) all keys lost by OBD. Besides it can also read password for keyless system. Detailed support list please refer to the chart below:


KM100 Hyundai TUCSON(NX4) IMMO List

Year System Add key All keys lost Read password Remote learning
2022 Immobilizer √(by OBD) √(by OBD) × √(by OBD)
2022 Keyless system √(by OBD) √(by OBD) √(by OBD) Not required
2023- Immobilizer √(by OBD) √(by OBD) × √(by OBD)
2023- Keyless system √(by OBD) √(by OBD) × Not required



  1. Generate Key

Universal key >> Europe >> Hyundai >> TUCSON(NX4) >> Hyundai TUCSON(NX4) 2022-2022 >> Generate universal key

Put a Autel IKEY Remote into KM100 key slot…



  1. Program All Keys Lost

Plug V200 VCI into OBD interface.

IMMO >> Hyundai >> TUCSON(NX4) >> 2022- >> Smart key >> Yes >> Immo status scan >> All keys lost(guided) >> Start


This function supports add key and all key lost.

Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.

Press “Yes” to continue.


Turn the ignition off. (Note: the instruments screen is black.)

Open and then close the driver door once!

Please enter the 6-digit security code on Autel KM100.


Note! Click “OK” to complete the following steps:

Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.

(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed.)


Programming succeeded.


Test the new key, it does work normally.




Contact Info:


Wechat: +86-13429866263

Whatsapp: +86-13429866263