Autel IM608 II Program 2020 Hyundai Elantra All Keys Lost

This is 2020 Hyundai Elantra but with 2019 system all keys lost. So next I’m gonna use Autel IM608 II to program a new key for this car. Total 2 steps: read password and key learning.

 

  1. Read Password

Connect IM608S II to OBD port.

IMMO >> Auto VIN >> OK >> USA >> Yes >> Smart key >> Control unit >> Read immobilizer password >> Read pin code(8A smart card)

 

This function only supports models with 8A chip type smart card.

Please ensure the key type is correct!

 

Turn the Hazard warning light on.

Turn the ignition off(note: the instrument screen is black).

Open and then close the driver door once!

Reading password

(This process takes a long time. Please wait…)

Pin code: 913133

 

 

  1. Key Learning

Keyless system >> Remote control learning >> Smart key learning

This function supports add key and all keys lost;

Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.

Press “Yes” to continue.

 

Turn the Hazard warning light on.

Turn the ignition off(note: the instrument screen is black).

Open and then close the driver door once!

 

Please enter the 6-digit security code: 913133

 

Autel IM608 Pro2 prompted:

Note! Click OK to complete the following steps:

Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.

(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key key chip can be successfully programmed.)

Programming succeed.

Press No to complete.

 

Number of current keys: 1

Please exit the system to vehicle selection menu and check if the key is programmed successfully.

 

Test the new key, it can normally work.

Perfect done.

 

 

Contact Info:

Email: sales@AutelShop.de

Wechat: +86-13429866263

Whatsapp: +86-13429866263

 

www.autelshop.de