- VAG Group Cars Pre-2011 Autel Service Reset
Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared. More information: www.autel.uk Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]The FAQ of KESS V2 and KTAG
The FAQ of KESS V2 and KTAG Diag Engineer :I try now to start a post where all the FAQ/solution […]Autel Series Introduction
Autel Series Introduction There are so many Autel product on internet,which one do you want or how to choice the one […]What is Tire Pressure Monitoring(TPMS) and How Does it work?
What is Tire Pressure Monitoring(TPMS) and How Does it work? The purpose of the Tire Pressure Monitoring system (TPMS) […]