How to use iPhone iPad IOS V8.0 on X431 Auto IDiag

How to use iPhone iPad IOS V8.0 on X431 Auto IDiag

X431 Auto Diag iOS requirements:

X431 Auto Diag works with iPhone / iPad/ iPod touch with IOS 8.0 or above IOS 8.0

Steps:

Step one: Install X431 IDiag software on IPhone.

Firstly, open Appstore on your IPhone, search X431, in the search result click one area to install, for example X431 china.

x431 auto diag scanner

Step two: connect IDiag diagnostic connector with car and iPhone/ iPad/ iPod touch

  1. connect X431 IDiag diagnostic connector with car

Plug DBscar interface near the steering wheel as the following picture shows.

Open X431 IDiag , turn on the ignition of the car.

x431 auto diag scanner

 

B, connect IDiag diagnostic connector with iPhone/ iPad/ iPod touch

Open the Bluetooth of IPhone to search the device, the name of device Bluetooth is diagnostic connector serial number; to match Bluetooth does not need password.

Step three: register CC number

After connect well the diagnostic connector, open the diagnostic software installed in your iPhone (iPad iPod touch), click “settings” on the upper right corner to enter and register CC number, note: you could enter your email address as your user name, also you could register at http://www.dbscar.com/

Step four: connector registration

After login, click “connector registration” in the “settings”, (register X431 IDiag diagnostic connector into CC account). The diagnostic connector serial number will automatically get, if not, please exist the software and enter again or manually input the connector serial number ( the SN is marked on the DBScar connector). Click serial number and in the box of X431 IDiag you open the password letter to get the password. Finish registration as the following pictures shows.

 Step five: Pay the software (you are allowed to pay on the PC)

After finish registering x431 IDiag, please click “get the software” (browse http://www.dbscar.com/), log in with the CC number and password, then go to the page for ordering the software, select the software according to the car model, you are available to buy multiple software as you want.

 x431 auto diag scanner

 

Step 6, Download the software

Click the diagnostic software to download, download the paid software and the free software (The OBD2 software is free of charge).

 x431 auto diag scanner

Step 7, you are ready to use Launch IDiag to diagnose car models

Back to the page of car models selection, click the car model icon you paid. You are ready to diagnose. The following pictures show how deal with the southeastern cars.

Note: when the PLC program releases the newest version, the terminal will give priority to the update of the PLC program.

  • TPMS sensor ID’s don’t match

    There are some of question and answer from Autel forum Question: I need to know what I’m missing here. I’m […]

  • Foxwell CRD700 Foxwell CRD700 Scanners Introduction

    Foxwell CRD700 Scanners Introduction Foxwell CRD700 is specially designed for fast and accurate OBD2 diagnosis of fault in common rail […]

  • Tips on throttle body relearn with autel maxidas ds708 diagnostic scan tool

    Autel MaxiDAS DS708 wireless diagnostic scan tool makes throttle body relearning very easy without cutting wire. Here is the step-by-step […]

  • vxdiag vcx nano VXDIAG VCX NANO and Forscan Test on Sport Trac Mountaineer

    VXDIAG VCX NANO and Forscan Test on Sport Trac Mountaineer I want just Shared my repairing experience of 2002 Sport Trac with 1998 Mountaineer drivetrain, with VXDIAG VCX NANO Ford and ELS27 FORScan scanner. Haven’t been able to get any past v86 to work when installed on a laptop running XP. I tried installing v81 then v91 then v97 but that didn’t work, not even for 3 days. Nor did changing the time, date and time zone. I was able to set the tire size and some other things, including reading DTCs that require communication with the PCM. But when attempting to program the latest calibration to the PCM or do the ABS Service Bleed, there’s suddenly a “PCM Communication Failure”. It also fails to do the KOEO and KOER tests, claiming it cannot sense when the brake pedal is depressed. All bogus, false errors. I get the same “communications failure” on a completely stock 1998 Mountaineer as I do on my 2002 Sport Trac with 1998 Mountaineer drivetrain. FORscan scan tool can do the KOEO and KOER tests and the ABS module self test with this VCX NANO device, but it does not yet support the ABS bleed function. FORscan can also clear KAM from the PCM, which IDS v86 fails to do with the VXDIAG VCX NANO, again that “communications failure” with the PCM. FORscan can also do the other tests that involve running the windows, wipers, locks and windshield washer. […]