How to disable GM Saab TPMS with GM Tech2 OBD2 scan tool

How to disable GM Saab TPMS with GM Tech2 OBD2 scan tool

Equipment:
GM Tech2Ⅱ scanner
CANdi interface (CANBUS)
32 MB PCMPIA memory card
A subscription Saab TIS2000 software CD
A laptop with wireless internet connection

NOTE:
CANdi interface, TIS2000 software CD and 32 MB card for gm tech2 can be purchased separately. GM Tech2 scan tool often comes with CANdi interface or TIS2000 software CD, you need to get the left stuff. If you need to do Saab vehicles, choose specific Saab TIS2000 software instead.

Vehicle model example: GM Saab 9-3

Instruction:

ⅠRemove BCM

Install 32MB card into GM Tech2 diagnostic scanner.

32mb card into gm tech2
Install GM Tech2 scan tool with CANdi interface connect it with vehicle via OBD socket
install gm tech2 with candi interface TPMS
Select model year
Select 9-3(9440)
Select Diagnostics
Select ALL
Select Add/Remove
Select BCM (Body Control Module)
Select Remove

ⅡRe-add the BCM
After removed the BCM, repeat the previous procedures and select Add

At this time, GM tech2 will list long lists of options for the car, like truck the presence of several optional items, like trunk switch in driver’s door, sunroof, TPMS, etc. For the functions you are not sure, Tech II scanner has an Auto-Suggest feature, where it will suggest the correct option.

Select vehicle region: EU (Europe)
(Do not select US for cars in US market are strictly set)

Select “Without TPMS” when the system pops out TPMS is preset notice
Answer the system questions prompted and instructions

Ⅲ Disable TPMS

Select model year
Select 9-3 (9440)
Select Diagnostics
Select All
Select Add/Remove
Select TPMM (Tire Pressure Monitoring Module)
Select Remove

The TPMS is successfully disabled.
Disconnect GM Tech2 from car’s OBD diagnostic socket.

 

How to buy OBDII scanner search: UOBD2

Relation News Search : Autel Maxidas ds708

  • Does the Maxisys MS905 Program New IMMOBILIZER on Chevy HHR ?

    Does the Maxisys MS905 Program New IMMOBILIZER on Chevy HHR ? Owner Question:  Hello we got a 2008 Chevy hhr towed in someone tried to steal the car and ripped the ignition switch and housing and immobilizer apart. We got a used steering column from the junk yard. I installed the new column. Did the 10 minute relearn now the car cranks and starts but won’t run. Does the new immobilizer have to be programmed to the body computer and the ECM. does the Autel MaxiSys Mini MS905 read and send the new fuel pass word to the BCM or ECM?   Tech […]

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]

  • Autel maxisys ms906 Autel Maxisys MS906 The Next Generation of Autel MaxiDAS DS708 Diagnostic Tools

    Autel Maxisys MS906 The Next Generation of Autel MaxiDAS DS708 Diagnostic Tools Many Autel Fans always like they device Autel […]

  • How to use Autel scanner MaxiDAS DS708 wireless printing

    The text below will explain how to use the wireless printing feature of original Autel MaxiDAS DS708 Automotive Diagnostic System. […]