Guide to BMW CIP Programming with MaxiSys Pro_img_3
How to register Autel MaxiDAS DS808 scanner
This a how-to guide of 2017 Autel MaxiDAS DS808 registration. – Necessary to perform Autel DS808 registration??? – Definitely yes! […]
VAG Group Cars Pre-2011 Autel Service Reset
Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared. More information: www.autel.uk Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]
Autel TMPS Tool Reprograming Lexus RX Sensor
Car model and year: the wheels came off 2016 Lexus RX, these were meant for the 4th gen. Symptom description: […]
Autel MaxiSys Elite Review
Autel MaxiSys Elite Review: BMW & Mercedes Coding and Programming Just for clarification purposes, and from my own personal experiences, here’s […]