5

  • Compare Auro OtoSys IM100 and Auro OtoSys IM600 with Autel MX808IM

    Here share a comparison of Auro OtoSys IM100 vs Auro OtoSys IM600 vs Autel MX808IM. This blog will compare their IMMO, Programming, OE-Level […]

  • Product Details of MaxiScope MP408

    The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your MaxiSys MS905/MS908 Tablet (with […]

  • autel-maxisys-tcp-subscription-01-1024x576 How to Register Autel MaxiSys ID and Update Autel Software

    This post is available with Autel MaxiSys tools TCP subscription (Total Care Program), registration, software updates and features.   The […]

  • VAG Group Cars Pre-2011 Autel Service Reset

    Please see the service reset procedure below; Click on the VAG manufacturer, wither Audi, Seat or other and then, Please select Systems Please select Control unit Please selectelectronics 1 Please select Instruments Please select Adaption The diagnostic tool will now ask you for a channel number. Select channel 002. Ask to set a new value and change to 00000. Once done escape from adaption’s and then go back in again. Select channel 053. Ask to set a new value and change to Once done escape from adaption’s and then go back in again. Select channel 054. Ask to set a new value and change to 00000. Once this is done, escape out of adaptions and instruments, turn ignition off and remove key. Leave for 10 seconds – then turn the ignition back on and service message should have cleared.   More information: www.autel.uk   Who Viewed This Article Also Views: OBD2 Scanner Autoboss V30, Autel MaxiDAS DS708 Comparison […]